Zero Energy Utility-disconnect Switch

Safety First
Easily and safely verify the voltage and de-energize a control panel, MCC, or any piece of downstream equipment directly from our panel. The Zero Energy Utility-disconnect Switch (ZEUS), also known as a safety disconnect switch or isolation panel, isolates incoming power from the main enclosure. It lowers the risk of an arc flash hazard during maintenance of the interior devices.
The PPE requirements for the use of Zero Energy Utility-disconnect Switch are level 0, saving operators PPE related time and hassle. The disconnect switch also ensures that all OSHA and NFPA 70E standards are met during Lock-out Tag-out.



FAQs
Q. Does it meet UL 508A requirements? |
A. The IPS Safety Disconnect Switch, as assembled, meets the UL 508A standard. |
Q. Do you sell a mounting kit for quick installation? |
A. We designed a quick mounting solution that enables our safety disconnect switch to be mounted to a new or existing control panel and maintain the UL rating of the connecting panel. |
Q. Does the IPS Safety Disconnect Switch kill all power into our control panel? |
A. The IPS Safety Disconnect Switch kills all power into the downstream control panel, motor control center, or piece of equipment. |
Q. What sizes do you have available? Do you make exceptions? |
A. We have designed solutions in the following sizes: 30A, 60A, 100A, 200A, 400A, and 600A and in voltages up to 600 Volts. Other sizes are available. Call to confirm. |
Q. What NEMA ratings do you offer? |
A. We have designed our safety disconnect switch for NEMA 3/12 and NEMA 4/4x enclosures. |
Q. Does the disconnect have visual indication through plexiglass or LED’s? |
A. The IPS Safety Disconnect Switch is designed to allow someone to visually see if the amperage is present downstream of the disconnect with redundant indication through LEDs. |
Q. What PPE level is required to switch off and test the disconnect? |
A. An operator wearing level 0 PPE (cotton shirt) is safe to shut off the disconnect of the IPS safety disconnect switch. |
Q. Does this product meet LOTO standards? |
A. Yes, IPS works with experienced electrical contractors who can provide quick and easy installation. The Safety Disconnect Switch exceeds the NFPA 70E rating and meets the OSHA energy isolation principle. |
Q. Can this disconnect connect to local PLC or DCS for state indication? |
A. Yes, our safety disconnect switch can be provided with auxiliary contacts. These contacts can provide indication or control for upstream and downstream equipment to determine whether the disconnect is open or closed. |
Q. Do I need to wire the test port or LEDs? |
A. No, this disconnect is designed to be completely pre-wired for installation in the field. |
Q. Can IPS install the disconnect to our machines and control panels? |
A. Yes, IPS works with electrical contractors that have experience for quick and easy installation. |
Q. Can I schedule a time for an overview of all the benefits and features? |
A. Yes, we are available for face to face meetings, webinars, and we also can schedule an onsite visit to your plant. |
402.905.3250 | 15555 Industrial Road, Omaha NE 68144 | info@indpanels.com